HATHASPACE HARMONY 600 (HSE600) - HEPA Air Purifier Manual

Introduction

Basic Information

Product Diagram

4-in-1 Purification System

Your new Hathaspace Air Purifier uses advanced technology to clean the air in your room.
Uses 4 advanced technologies to keep your air clean, capturing airborne particles:

1. Polypropylene Pre-filter
   A preliminary Polypropylene Pre-filter removes large particles like pet hair, dust, and floating debris. This helps extend the life of the composite filter.
2. Pre-filter
   Non-woven materials serve as an extra pre-filter, capturing small corrosive particles to extend the life of the H13 HEPA filter.
3. Activated carbon filter
   Activated carbon absorbs smoke, odors. and gases in the air.
4. H13 HEPA filter
   This high-efficiency HEPA filter can capture small micron particles. These smaller particles make up the majority of harmful air pollutants like tobacco smoke and lead dust.

No.	Icon	Function
1		Power on/off
2		Timer button: 1/2/4/8h
3		Fan speed buttons: Sleep mode, Levels 1, 2, 3 Press the speed button to choose sleep mode. In sleep mode, all other indicator lights are turned off.
4		Filter reset button After the unit has been used for 2000 hours, the unit will remind the user to replace the filter when it is powered on each time.
5		AUTO button and child lock button Short press the auto button to enter auto mode, and long press 3 seconds to enter child lock mode. In Auto mode, the fan speed will automatically adjust according to the air quality.
6		Light turn/off button
7		Brightness Adjustment button
8		Air quality indicator (Green, yellow, red) When on auto function, the color of the light will change based upon the air quality.

Air Quality Indicator

Particle Sensor

Note: Clean the appliance regularly with soft brushes, eg. a makeup brush.

Brightness Adjustment

There are three levels of light brightness:

• The default brightness of lights is 100% (including all indicators and air quality lights)
• Press the brightness adjustment button to manually adjust the following air quality indicator light levels: 30% » 60% » 100% » 30%
• The brightness is not memorized after the light is adjusted and will still be 100% when the machine is turned on next time (unless you press and hold the brightness key for 3 seconds to set the memory brightness setting)
• After adjusting the brightness of the light, long press the brightness key for 3 seconds to set the memory light brightness (ex. to set 30%, long press for 3 seconds and the light brightness will be 30% after the next startup)

Air Purifier Maintenance

Cleaning the Unit

• Please turn off the power and unplug it before cleaning the air purifier.
• To remove dust, lightly wipe the unit with a soft, clean cloth. If needed, wipe the unit with a clean damp cloth, then immediately dry it with a clean dry cloth. Don't use alcohol, oil, or benzene to clean the unit
• Do not immerse the unit in water

Note: The HEPA filter, gray color non-woven pre-filter, and the activated carbon filter cannot be reused, cleaned, or replaced after being used. Please don't wash them with water.

Replacing the filter

To maintain the air purifier's performance and purification effect, we suggest replacing the filters every 3-4 months or 2000 hours.

1. Unplug the air purifier from the electrical outlet.
   
2. Twist the bottom panel counterclockwise to remove the panel.
   
3. Remove the old filter and dispose of it properly. The filter is not recyclable.
   
4. Remove the new filter packaging and insert it into the air filter.
5. Turn it clockwise to tighten the bottom panel.
   
6. Place the air filter on the table again and plug it back into the electrical outlet. The air purifier will automatically clean the air again.

Note:

• The actual replacement frequency depends on use and air quality. If it is on day and night or your surrounding air is highly polluted, it will need to be replaced sooner.
• Please remember to press the "Filter Reset " button for 3 seconds to reset the air purifier, otherwise, the filter light will keep blinking.

Troubleshooting

Customer Support

Hathaspace cherishes your experience. If you have any questions or concerns about your air purifier, please feel free to contact our customer support team.
Email: team@hathaspace.com
Website: https://hathaspace.com

Safety Instructions

This appliance is a desktop air purifier. To reduce the risk of fire, electric shock, or serious injury, basic safety precautions should always be followed when using electrical appliances. Please read and follow all the safety instructions before using and only use this air purifier as described in this manual.
This appliance has a polarized plug, which means that one blade is wider than the other. To reduce the risk of electric shock, this plug is intended to fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to bypass this safety feature.

To reduce the risk of fire, electric shock or injury to persons, do not use replacement parts that have not been recommended by the manufacturer (e.g. parts made at home using a 3D printer).

• Do not use the air purifier in wet or humid environments, or outdoors. This appliance is designed for indoor use only.
• Do not put the air purifier on an uneven floor such as a bed or sofa. Always make sure to place the air purifier on a flat surface before operating. Leave more than 20 cm distance between the air purifier and the wall.
• Do not place the air purifier near sources of heat, such as stove tops, ovens, or radiators.
• Do not handle the unit with wet hands. Thoroughly dry your hands before handling any part of the air purifier.
• Do not use without removing the plastic wrap from the air purifier and filters.
• Do not attempt to use other filters with this appliance. Only use Hathaspace air replacement filters for this unit.
• Do not block the air inlet, outlet, or sensor.
• Do not insert fingers or objects into the air outlet.

• Do not immerse the air purifier in liquids or clean the appliance with any liquid to avoid electric shock and/or electrical fires.
• Do not run the power cord under carpeting, rugs, furniture, or appliances. Place the power cord away from high-traffic areas.
• Do not operate the unit if the power cord or plug is damaged. Doing so may result in injury or damage to the unit.
• Do not repair the air purifier by yourself if it does not work; it will void your warranty. If your appliance is no longer working, damaged, or not functioning properly, discontinue use, unplug immediately and contact customer support.
• Do unplug the appliance from the power supply before servicing.
• Do inspect the unit frequently. Dirt that has been collected should be removed regularly to prevent excessive accumulation that may result in flashover or fire.