Page 1
UM8810RT/UM8811RT 8’ x 10’ /8’ x 11’ Canopy Replacement Assembly and Operation Guide...
Page 2
UM881xRT CANOPY REPLACEMENT S T E P 1 Carefully remove umbrella from base and lay on clean, flat, smooth surface (Fig. 1). Using a phillips screwdriver, unscrew 8 screws from rib ends (Fig. 2) and set aside. (Fig. 1) (Fig. 2) S T E P 2 Remove finial by turning counter clockwise (Fig.
Page 3
S T E P 3 Unfold new replacement canopy and shake out. Slide canopy over top of umbrella and line up the grommet on the canopy with hole on top of the umbrella (Fig. 5). Place finial back onto umbrella by turning clockwise (Fig. 6). Do not tighten completely. Line canopy seams with ribs, then continue to tighten finial.
Need help?
Do you have a question about the UM8810RT and is the answer not in the manual?
Questions and answers