Working With Hp Indigo Electroink Silver; Disabling Automatic Color Calibration; Silver Color Appearance And Adjustments - HP Indigo 6600 How-To Manual

4

Working with HP Indigo ElectroInk Silver

Working with HP Indigo ElectroInk Silver follows these steps:
1. Disabling the automatic color calibration.
2. Printing a special job and adjusting if needed —
11
● Checking Silver color appearance on page
● Performing Silver color adjustments on page
3. Adjusting for overlap between frames —
4. Performing press maintenance —
5. Setting the press —

Disabling automatic color calibration

It is recommended to disable the automatic color calibration feature. Go to Main Menu > Options > Print
Preferences, and clear the Enable automatic color calibration option.
If performing Full Color Calibration without silver, run the
calibration (important for ElectroInk Silver). Open the wizard from (CE level) Main Menu > Problem Solving
> CE Applications.
NOTE: See also

Silver color appearance and adjustments

To check the appearance of the printed Silver color, you need to print a special job. If the output
is satisfactory, there is no need for additional steps. However, if there are print artifacts issues
(ghost, "casper", white frame), you need to perform some adjustments.
Recommended maintenance on page 20
Enabling double-hit printing on press for HP Indigo ElectroInk Silver on page 20
Full color calibration on page
Silver color appearance and adjustments on page
12.
14.
Reducing background overlap on page 17
Auto Bias Wizard following every color
31.
Working with HP Indigo ElectroInk Silver 11