Vibration Reduction Mode - Nikon AF-S VR Zoom-Nikkor 24-120mm f/3.5-5.6GIF-ED Instruction Manual

Focusing
Set your camera's focus mode selector according to this chart:
Cameras
F6, F5, F4-Series, F100, F90X/N90s*,
En F90-Series/N90
*
N80-Series , F75-Series/N75-Series
F70-Series/N70
*
N65-Series , Pronea 600i/6i
Pronea S, D2-Series, D1-Series, D200,
D100, D80, D70-Series, D50, D40
Other Nikon AF cameras
(except the F3AF, F-601/N6006
Autofocus with manual override (M/A mode)
1 Set the focus mode switch to M/A. (Fig. B)
2 Autofocus is provided, but you can manually override the focus by operating the
separate focus ring while lightly depressing the shutter release button or AF start
(AF-ON) button on the camera body of cameras so equipped.
3 To cancel manual override, remove your finger from the shutter release button or
the AF start button.

Vibration reduction mode

The following cameras are usable:
35mm SLR cameras: F6, F5, F100, F80-Series/N80-Series, F75-Series/
N75-Series, F65-Series/N65-Series;
Digital SLR cameras: D2-Series, D1-Series, D200, D100, D80, D70-Series,
D50, D40
･ When using the lens with cameras other than those listed above, set the vibration
reduction ON/OFF switch to OFF to cancel the vibration reduction mode. With the
Pronea 600i/6i camera, in particular, battery power may become depleted quickly if this
switch is left ON.
16
Camera's focus mode
*
, F80-Series/
*
,
*
,F65-Series/
*
,
*
)
Lens' focus mode
M/A
C
Autofocus with manual
S
priority
AF
Manual focus
M
(Focus assist is available.)
C
Manual focus
S
AF
(Focus assist is available.)
M
M
Manual focus
(Focus assist is available.)
* Sold exclusively in the U.S.A.