DTF STATION Miro 13 Operation Manual
  1. Manuals
  2. Brands
  3. DTF STATION Manuals
  4. Printer
  5. Miro 13
  6. Operation manual

DTF STATION Miro 13 Operation Manual

Hide thumbs

Advertisement

Table of Contents

Miro 13

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Miro 13 and is the answer not in the manual?

Questions and answers

Mary L Chambers
May 24, 2025

Filters i purchased to replace original filter on my miro 13 do not fit. They are much thicker. ITs says for the miro 13 right on the purchase page. I need help with this. What filters do i buy if its not these on your purchase description

0

Related Manuals for DTF STATION Miro 13

Summary of Contents for DTF STATION Miro 13

  • Page 1 Miro 13...

  • Page 2: Table Of Contents

    Table Of Contents Safety Instructions Technical Parameters Machine View Control Panel Guide Operating Instructions...

  • Page 3: Safety Instructions

    Safety Instructions When using your Smoke purifier, basic precautions should always be followed, including the following: Read all instructions. 2. Use smoke purifier only for its intended use. 3. To reduce the risk of electric shock, do not immerse the smoke purifier in water or other liquids.

  • Page 4: Technical Parameters

    Technical Parameters Miro 13 (DS-A3) Model: 1170W,5.3A,220V 1170W,10.6A,110V Power: 1017×570×506mm 1017×570×506mm Machine Size: 72cm*62cm*49cm 72cm*62cm*49cm Packing Size: 35Kg 35Kg PackingWeight: CE,FCC CE,FCC Certificate: One year without filter board One year without filter board Warranty:...

  • Page 5: Machine View

    Machine View Front View Top View...

  • Page 6: Control Panel Guide

    Internal View Control Panel Guide Suggested Setting:...

  • Page 7: Operating Instructions

    Operation Instructions Please scan the QR code here to see the playlist of all installation/maintenance videos: 1. Install the filter 2. Install the film collector 3. Loading media film 4. Adding powder 5. Changing filter board 6. Daily maintenance 7. How to set main heating temperature and pre-heating temperature (1)Main heating temperature setting Short press SET until screen shows as below, to set the main temperature at 120 °C, then press SET two times to confirm the setting and exit setting...
  • Page 8 How to set the direction of paper collector and powder shaking bar...

This manual is also suitable for:

Ds-a3

Table of Contents