Using The Locking Clip - Dorel Juvenile Group Enspira 65 Instruction Manual

3-in-1 convertible car seat
Table of Contents

Advertisement

4.
Position Shoulder Belt
To help position the shoulder
belt, you may need to secure the
shoulder belt in one of the two
shoulder belt-positioning guides.
NOTE: Use the shoulder
belt positioning guide only if
necessary to correctly position the shoulder belt on the child.
Check periodically to ensure your child has not moved out of
position and loosened the shoulder belt.
Do not use the vehicle
lap belt only when
using this seat as a
booster seat.
The shoulder belt
must always be
adjusted snugly
across the child's
chest.
NEVER place the
shoulder belt behind the child's back or
under the child's arms.
Failure to follow these warnings can result
in serious injury or death to your child.
59
I. Using the Locking Clip
You will rarely need to use a locking clip except in some
older vehicles. Built-in child restraint locking systems
have been required in vehicles since 1996, and many
vehicles had these features even earlier. Review section
D-4 and your vehicle owner's manual to determine if
your vehicle belts require a locking clip.
If you need a locking clip immediately, they are likely
available at an auto dealership, an auto store, or where
you purchased this child restraint. You can also call us
at 1-800-544-1108 for one.
A locking clip will not fix all types of seat belt problems.
You
MUST
have a lap and shoulder belt to use a locking
clip.
Do not use the locking clip when using this
seat as a booster seat.
For Rear-Facing installation, follow Section F-4
Warnings and Steps 1-4 before starting locking clip
installation.
For Forward-Facing installation, follow Section G-5
Warnings and Steps 1-3 before starting locking clip
installation.
60
continued on next page.

Advertisement

Table of Contents
loading

Table of Contents