Advertisement
Manual adjustment of motor parameters
If the motor parameters of the gimbal do not match due to the difference in weight when
the camera is equipped with accessories (such as a hood, a filter, etc.) or the individual
differences in the gimbal, you need to manually adjust the motor parameters.
Please install PC software "gTuneDesktop" by Gremsy for motor parameters adjustment.
Sections:
1. About motor parameters
2. Connect gimbal to PC
3. Start gTuneDesktop and input initial parameter
4. Adjust motor parameters on each axis
5. Check the image
6. Trouble shooting
1. About motor parameters
Stiffness
It is a parameter to control the horizontal stability of gimbal. (Min: 0` Max: 255)
A higher value causes gimbal oscillation, while a lower value causes decreased stability.
*This value varies depending on the model of camera and lens used.
Gyro Filter, Output Filter
It is a parameter to control the effect on gimbal oscillation control. (Min: 0` Max: 10)
A higher value can suppress oscillation but will sacrifice horizontal stability.
Hold Strength
It is a parameter to control the holding strength of gimbal position. (Min: 0` Max: 100)
The gimbal can hold the position with a higher value, but oscillation will occur.
Gain
It is a parameter to control the speed of gimbal returning to horizontal. (Min: 0` Max: 255)
The gimbal can be leveled quickly with a higher value, but oscillation will occur.
Advertisement
