Table of Contents
Advertisement
OPERATION
4. Push in the POWER switch (D to turn OFF power.
| If a disc is still in the magazine:
{Viewed fram the rear side}
Disc tray
=
Single-disc magazine
| Be careful not to drop the disc when the disc tray comes out.
OPERATION FOR NORMAL PLAYBACK
Operation example
¢ Start playback
POWER]
— Insert magazine (disc)
> | PLAY
2. Press the PLAY key @.
The PLAY indicator will light, and playback will begin.
avreeves fii iff iii iit iti iti iil iff
6.@
c7J
® You can now
enjoy the music after all controls
have been set property.
NOTE:
The playback for the magazine will be carried out according to the
programs in the multi-memory if they are previously set.
TO SELECT A DESIRED DISC
© With this operation, playback will begin from the first track
on the specified disc.
18
<PRB1102>
E
NOTE:
Playback cannot begin from the disc number of a magazine
tray which does not contain a disc.
Operation example
During stop mode, to playback the second disc.
DISC 2]
TO SELECT A DESIRED TRACK
(DIRECT TRACK SELECT OPERATION)
Playback starts from the selected track and continues to the last
track.
1. During
playback
or stop
mode
select
a track
number with TRACK NUMBER keys 1.
Track
1 to 10 can be specified directly with the 1 to 10
number keys.
* When specifying track 11 and beyond, press the +10 key,
and then press one of the 1 to 10 keys to specify the
second
digit. Each
time
the
+10
key is pressed,
the
number will increase by a factor of 10. (For 0, use the 10
key.)
* To specify track 20 and beyond, press the =20 key and
one of the 1 to 10 keys for the first digit (for 10, 20, 30,
etc) and for the second digit. (For 0, use the 10 key.) When
specifying a track with the 1 to 10 keys during playback,
the
selected
track
will
be
searched
for
immediately.
However,
the track number
must
be selected
within 4
seconds
after the
+10
key and
220
key is pressed.
Otherwise, it will be cancelled.
Operation example
To play track 3.
a]
To play track 20.
+10] /+10][10] or [220] [2] [70
To play track 36.
2 201 [3] [6] or [+10] [+10][+10][6}
NOTE:
These operation are not available in program mode.
Performing these operation during random playback causes
randam playback to be cancelled.
TO STOP PLAYBACK
| STOP] or [EJECT
1. Press the STOP key @ or the EJECT key &.
Spee
Advertisement
Table of Contents
