Yamaha FJR1300AE 2015 Owner's Manual page 56

Instrument and control functions
1. Menu switch "MENU"
2. Select switch "
3. Use the select switch to select the
4
desired preload setting pictogram.
Select the suitable setting from
the following 4 pictograms ac-
cording to your load condition.
1
3
1. Solo riding
2. Solo riding and luggage
3. Passenger riding
4. Passenger riding and luggage
While the preload is being adjust-
ed, the information display will
show a group of dots moving in a
circle. Once the selected picto-
gram returns, the preload adjust-
ment is complete.
2
1
/ "
GEAR
N
While the preload is being adjusted,
the information display may change as
follows.
 If the key is turned to "OFF" or the
engine is stopped while the pre-
load is being set, the following
preload setting pictogram will
flash to alert you that the current
preload setting does not match
2
the pictogram. If this occurs, ad-
just the preload again.
GEAR
N
4
 If the vehicle starts moving, the
following preload setting picto-
gram will flash to alert you that the
current preload setting does not
match the pictogram. If this oc-
curs, stop the vehicle and adjust
the preload again.
4-39
GEAR
N
GEAR
N