Yamaha FJR1300AE 2015 Owner's Manual page 27

Function display
GEAR
N
A.TEMP
C.TEMP
TIME TRIP
0:06
1. Function display
1
5
1. Grip warmer adjusting function
2. Information display selection function
3. Windshield adjusting function
4. Damping force adjusting function
5. Preload adjusting function
Push the "MENU" switch to switch the
display between the following func-
tions. The display changes each time
the switch is pushed.
 Grip warmer adjusting function
 Information
function
 Windshield adjusting function
 Damping force adjusting function
 Preload adjusting function
TIP
The preload adjusting function will ap-
pear only when the vehicle is stopped
with the engine running.
Instrument and control functions
1
˚F
77
˚F
Lo
2 3
4
display selection
The following pages contain an expla-
nation of the grip warmer, information
display, and windshield functions. See
page 4-38 for an explanation of the
preload and damping force adjusting
functions.
Adjusting the grip warmer
This vehicle is equipped with grip
warmers, which can only be used
when the engine is running. There are 4
grip warmer settings.
Setting
Off
Low
Middle
High
To increase the grip warmer tempera-
ture, push the "
switch. To decrease the grip warmer
temperature, push the "
select switch.
NOTICE
 Be sure to wear gloves when
using the grip warmers.
 If the ambient temperature is 20
°C (68 °F) or higher, do not set
the grip warmer to the high set-
ting.
 If the handlebar grip or throttle
grip becomes worn or dam-
aged, stop using the grip warm-
ers and replace the grips.
4-10
Display
" side of the select
" side of the
ECA17931
4