Advertisement
Functions
BEFORE FIRST USE
Remove all promotional labels and packaging
materials from the multicooker. Ensure that all
parts and accessories listed are accounted for
before discarding the packaging. Wash the cast
iron pot, lid and steaming basket in hot, soapy
water, rinse and dry thoroughly.
IMPORTANT NOTE
The cast iron pot and lid should be seasoned
before their initial use by adhering to the
guidelines provided in the care and cleaning
section on page 18 of this instruction booklet.
Ensure that the multicooker base and the
exterior of the cast iron pot are free from any
dirt or debris prior to placing the cast iron pot
onto the multicooker base.
Place the cast iron lid on the cast iron pot.
USING THE MULTICOOKER
All cooking tasks must be completed with
the cast iron pot securely placed on the
multicooker base.
CAUTION
When cooking with functions that generate
moisture, such as steam, condensation on the
exterior of the pot may result in water pooling
on the benchtop. To protect the benchtop
surface, ensure that the cooking base and pot
are placed on a heat-resistant, water-resistant
surface or non-slip mat when in use.
WARNING
Always operate the multicooker on a stable
and heat resistant surface.
10
WARNING
Do not place the multicooker, hot cast iron pot
and/or lid on a heat sensitive benchtop, such as
a stone benchtop, during or after cooking. This
type of benchtop is sensitive to uneven heat
and may crack if heated locally. Always use an
appropriately sized wooden chopping board.
Utilize the wooden chopping board to safely
rest the hot cast iron pot or lid when necessary.
This includes placing the lid on a wooden
chopping board during cooking, especially
when you need to remove it for stirring, and
also using a wooden chopping board when
serving the pot at the table.
Insert the power plug into a 230V or 240V
power outlet and switch on. The multicooker
will beep and the screen will illuminate,
indicating that it is now in standby mode.
Use the preset function buttons to select your
desired browning or cooking function.
Once the preset function has been selected, the
LED display will show the default time and/or
power level (P1, P2, P3, P4, or P5). These power
levels are applicable only to the SEAR and
SAUTÉ functions. The abbreviation "P" stands
for Power, with level 1 being the lowest and
level 5 being the highest.
To customise cooking settings, use to
to adjust cooking time, and
power level for applicable functions.
Select the START/CANCEL button to confirm
the selection and start cooking.
The START/CANCEL button can be pressed
at any time to stop and cancel the function.
The multicooker will return to standby mode.
The multicooker should be switched off and
unplugged from the power outlet.
and
and
to change
Advertisement
