Spread Half Load; Program Delay - Smeg DWA147 Instruction Manual

Table of Contents

Advertisement

If the water hardness has been set on a value above H3, and the "Flexi
Tabs" option is activated, the relative light flashes, warning of a setting
error. Integrated products are not suitable for use with very "hard" water;
this does not prevent the use of the option, but the washing results
might not be of the best.
HYCLEAN
Increases the temperature of the final hot rinse to 70°C to ensure a further
reduction in the bacteria level. If the temperature in the tank falls during
this stage of the program (e.g. because the door is opened or due to a
power blackout), the light of the option and the program lights flash to warn
that the additional washing phase has not been completed successfully.
This does not mean that the wash program has been less effective than
usual.

SPREAD HALF LOAD

Suitable when there are not many dishes to be washed, it saves energy
and reduces the program duration. Place dishes in both baskets then
load the detergent dispenser than less than the normal amount for a full
load.

PROGRAM DELAY

The PROGRAM DELAY button can be pressed to delay the start of the
washing program by from 1 to 12/24 hours depending on the model. This
option allows the dishwasher to be operated at the time of day of the user's
choice. The first time the PROGRAM DELAY button is pressed the option
light comes on and 1:h appears on the DISPLAY (9). The button can then
be pressed again, to set the delay required (
pressed for a few seconds, the DISPLAY (9) shows the time left (time
remaining) to the end of the selected program (e.g.
washing cycle + program delay). When the user confirms the program start
(read the relative section) a prewash will be carried out, after which the
PROGRAM DELAY set will begin, and the time remaining on the DISPLAY
will gradually be counted down. At the end of the delay set, the option light
goes out and the washing cycle starts.
N.B.: It is not possible to select the PROGRAM DELAY option once
the cycle has begun.
16
User instructions
2:h, 3:h
, ... etc.). If no button is
5:40
, duration of the

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ig 6508.1 geDwa314x

Table of Contents