Washing Programs; Switching On; Programming; Program Selection - Smeg DWA147 Instruction Manual

User instructions

3.2 Washing programs

The dishwasher is equipped with a control panel, described in chapter
"3. Description of the controls", from which it is possible to carry out all
the power switch-on, switch-off and programming operations.
Before starting a washing program make sure that:
•
The water supply tap is open.
•
The correct amount of detergent has been added to the
dispenser.
•
The baskets have been correctly loaded.
•
The spray arms are able to rotate freely and without
obstruction.
•
The dishwasher door is securely closed.

SWITCHING ON

When the ON/OFF button (1) is pressed, the dishwasher switches on.

PROGRAMMING

Programming operations are only possible with the door closed.

PROGRAM SELECTION

Press the PROGRAM SELECTION button (2) several times until the light
of the program required comes on. As the user scrolls through the
programs the INFORMATION DISPLAY (9) will show the scheduled
duration of each program, and the PHASES/PROGRAMS lights (5) will
indicate the washing phases it includes.
13