Selecting Half Load Wash; Extra Programs - Smeg ST1124 Instruction Manual

User instructions

SELECTING HALF LOAD WASH

This function is ideal for small loads and saves water and electricity. It is
controlled by the HALF LOAD (10) button, with two alternatives:
1) press the button once to select washing in the top basket (the
relative light comes on);
2) press the button a second time to select washing in the bottom
basket (the relative light comes on);
press the button a third time to return to the normal full load
3)
washing mode (washing in both baskets, both lights off).
When washing in the bottom basket only, the cutlery basket can be
divided so that only half is used.

EXTRA PROGRAMS

Button (6) gives access to three extra programs in addition to the ones
which can be selected directly using the program selector button.
This button must be pressed (the light comes on) after selection of the
"main" program (2,3,4) and has no effect if it is pressed when programs
1 and 5 are selected.
This function is retained in the memory, so the button has to be
pressed again (the light goes out) if the user wishes to execute one of
the 5 main programs at the next cycle.
(on some models only)
23