5.2
Operation
Before First Use
1. Before use, clean the appliance observing instructions in section 6 'Cleaning'.
2. Then dry the appliance thoroughly.
Appliance Assembly
1. Before commissioning, assemble the appliance observing the following
instructions.
WARNING! Injury hazard!
The blade is very sharp!
Be very careful when attaching the blade.
Wear safety gloves resistant to cutting.
EN
2. Place the stainless steel bowl on the
lower housing of the appliance so
that it is secured to the bowl
attachment on the housing and to
the blade drive shaft.
3. Fasten the stainless steel bowl with
two securing locks on the left and
right side.
12 / 18
Fig. 2
Installation and operation
Fig. 3
4. Place the blade on the drive shaft in
the stainless steel bowl.
120840