Advertisement
User instructions
USE OF 3/1 PRODUCTS OPTION (depending on model)
Shown on the DISPLAY (G): "3/1/Normal detergent".
Press (D) to display the option and press (E) to enable the (3/1) option or
return to the use of normal detergent (Normal).
This option has been developed for use with powder or tablet detergents
containing substances that substitute for regenerating salt and rinse aid,
known on the market as "3 in 1" or "triple action" products. In this case
the dishwasher will make the most effective use of the product, not using
any salt or rinse aid which the appliance may contain.
If the water hardness has been set on a value above H3, and the 3/1
option is activated, the DISPLAY (G) flashes, warning of a setting error,
because these products are not suitable for use with very hard water.
This does not prevent the use of the option, but the washing results
might not be of the best.
EXTRA SANITISATION RINSE (depending on model)
(available in all programs except the soak program, standard in ULTRA
CLEAN programs)
Shown on the DISPLAY (G): "Extra hygiene 1/0".
Press (D) to display the option and press (E) to enable (1 on display) or
disable (0 on display) it.
This function performs an extra sanitising rinse at the end of the washing
cycle, assuring a further reduction in the number of bacteria present.
If the temperature falls while the sanitisation rinse is in progress (e.g.
due to a power blackout or because the door is opened), the DISPLAY
(G) flashes until the dishwasher is switched off or a new program is set,
to warn that the option has not been carried out.
19
Advertisement
