Advertisement
The QUICK WASH program takes approximately 34 minutes and wshes at 45°C,
suitable for a modest sized load of tableware with light soiling. Ideal for entertaining, it
provides a clean set of dishes in little over half an hour.
The DELAYED START and "3/1" (detergent) options cannot be used with the soak
program.
The EXTRA HYGIENE option cannot be used with the soak and the quick wash
program.
The programs for which the EXTRA HYGIENE option is set terminate with an
additional anti-bacteria rinse that ensures a further reduction in the bacteria level. If
the temperature falls during this stage of the program (e.g. because the door is
opened or due to a power blackout), "EXTRA HYGIENE" flashes on the display at
the end of the wash cycle to warn that the anti-bacteria effect is not guaranteed.
(1)
Average power consumption level 2.
(2)
The cycle duration, energy consumption and temperatures which appear on the
display may vary depending on water and room temperature and type and
quantity of dishes.
The washing cycle will not take place if the dishwasher door is left open
or not properly closed.
CONTENTS OF DISPLAY WHEN PROGRAM IS IN PROGRESS
The top line displays the temperature in the tank, alternating (every 4
seconds) with the program being performed and the current program
stage.
The bottom line will show the program duration "Duration XX min",
where XX is the time left before the end of the program, in minutes.
If DELAYED START (C) is set, until the program starts the second line
shows the message "Starting in YY hh/mm", where YY are the hours
(from 1-12/1-24 depending on model) or minutes (when less than 1 hour)
left before the program starts.
Any warning messages (e.g. "No salt") will appear on the DISPLAY (G)
during the washing stage, alternating with the time left to the end of the
program.
If the 3/1 PRODUCTS function (only available on some models) is set,
the no salt and no rinse aid warning messages do not appear.
14
User instructions
Advertisement
