Advertisement
User instructions
Assisted programming (Wizard)
•
Press (D) or (E) in repetition to display
the type of dirt on the dishes, on the top
line of the DISPLAY (G).
•
Press (B) or (C) to confirm the selection and continue programming.
Choose the type of wash (rapide or normal) following the procedures
described above (D or E to display the selections available, B or C to
confirm).
At the end of assisted programming, the DISPLAY (G) shows "Wait
please..." and a few seconds later you will be offered the option
selection function (button B/C to accept, D/E to reject).
Refer to the "OPTIONS" section to view the possibilities available.
Standard programming
Select "No" (key B) to disable assisted programming and the system
will offer the last program performed.
To start this program, simply close the door (buzzer sounds, if
enabled).
To select another program, press (B) in repetition until the program
required is displayed, then select any options; to start this program close
the door (buzzer sounds, if enabled).
See TABLE OF PROGRAMS on following pages.
At the end of the assisted or standard
programming procedure, the programmed
duration of the washing cycle, in minutes,
appears on the bottom line of the DISPLAY
(G).
11
Advertisement
