Creating Multi-Point Connections; Battery Level Notification - Technics EAH-A800E Owner's Manual

Creating multi-point connections

A maximum of two Bluetooth
The default setting is "OFF".
• When the "Technics Audio Connect" app is used, you can set to "ON".
For information about the connection and registration of Bluetooth
"Connecting a Bluetooth
1
Pair this unit with each of the Bluetooth
2
Connect the first Bluetooth
3
Connect the second Bluetooth
Note
• For more details, including more specific setup instructions, refer to the operating instructions for the Bluetooth
devices.
• This may not work with some apps and software.
• LDAC cannot be played back when this function is ON.

Battery level notification

• When the unit is turned off, an English guidance message will be heard indicating the battery level.
• When the battery level starts to run low, the blinking LED indicator will turn from blue to red, and as it drops further,
you will be notified by one beep every 1 minute.* When the battery runs out, a tone and a guidance message will be
heard and the power will turn off.
* If you press [Í/I] twice quickly, an English guidance message will be heard and you can check the battery level.
®
devices can be connected at the same time.
®
device")
®
device and the unit.
®
device and the unit.
Operation
®
®
devices.
20
devices and the unit (l 13,
®