Smeg D4W Manual For Using page 12

User instructions
3.2 Washing programs
The dishwasher is equipped with a control panel, described in chapter
"3. Description of the controls", from which it is possible to carry out all
the power switch-on, switch-off and programming operations.
Before starting a washing program make sure that:
•
The water supply tap is open.
•
The correct amount of detergent has been added to the
dispenser.
•
The baskets have been correctly loaded.
•
The spray arms are able to rotate freely and without
obstruction.
•
The dishwasher door is securely closed.
LIGHTING
When the ON/OFF button (1) is pressed, the dishwasher switches on
and the light
PHASES/PROGRAM lights (7) will come on.
PROGRAMMING
In this model of dishwasher, all programming procedures can only be
carried out with the door closed. As long as the door is open, the
PROGRAMS lights (4) and PHASES/PROGRAM lights (7) will remain
off.
SELECTION PROGRAM
When the button relating to the program required is pressed, the relative
light will come on to confirm the operation.
(3) comes on. About 2 seconds
The program selection is possible
through the relative buttons (2).
later, the
11