Makita CL003GA103 Instruction Manual page 8

PARTS DESCRIPTION
1
Fig.6
1 250 mL (0.07 gal.) dust
case
5 HEPA filter (Filter frame
in white color) (Optional
accessory)
ASSEMBLY
CAUTION:
Always be sure that the tool is
switched off and the battery cartridge is removed
before carrying out any work on the tool.
NOTICE:
Make sure all the attachments and
components are secured in place properly before
use.
Installing and removing cleaner
attachments
CAUTION:
After installing attachments, check
if they are securely installed. If the attachments are
installed imperfectly, they may come off and cause
personal injury.
CAUTION:
Be careful not to hit your hand on
the wall etc. when removing the attachments.
2
3
2 Mesh filter
6 Sponge sheet
4
5
3 Cyclone body
7 Cleaner body
When using attachment with lock
function
To install attachment, insert it to the suction inlet of the
cleaner until it clicks. Make sure that the attachment is
locked.
2 3
Fig.7
► 1 . Suction inlet 2. Attachment with lock function
3. Hook
NOTICE:
When installing the attachment with
lock function, be sure to align the release button
on the cleaner with the hook on the attachment. If
they are not aligned, the attachment will not be locked
and may come off from the cleaner.
8 ENGLISH
7 8
6
4 High performance
filter (Filter frame in
gray color) (Optional
accessory)
8 Hand strap (Country
specific)
1