Setting The A/B Divider (At A/B Dir To A/B 90°) - Hohner HM210IT Manual

5.3. Setting the A/B Divider (at A/B Dir to A/B 90°)
The division ratio for the A/B pulses is set at the DIL switches DIL5 and DIL6. The switch
positions use a binary code like shown in the subsequent list. (DIL1/6 = ON, DIL1/7 = OFF).
DIL5
(Left 8-pole)
1 2 3 4
ON OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF
OFF ON OFF OFF OFF OFF OFF OFF OFF OFF OFF
ON ON OFF OFF OFF OFF OFF OFF OFF OFF OFF
OFF OFF ON OFF OFF OFF OFF OFF OFF OFF OFF
ON OFF ON OFF OFF OFF OFF OFF OFF OFF OFF
OFF OFF OFF OFF OFF OFF OFF OFF OFF ON
OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF ON
ON ON ON ON
Example: Input A/B dir, output A/B 90 ° with A/B division 1:6 (setting DIL6, 5: OFF ON OFF)
Division 1:2: See Input/Output Mode Conversion (A/B Divider: All OFF)
Rev. 1
Divider [A/B]
5 6 7 8
ON ON ON ON
HM210IT User's Manual
DIL6
(Left 3-pole)
1 2 3
OFF
ON ON ON
www.hohner.it
Comment
Binary value
division =>
1 : (Binary value +1) x2
value 1 => 1 : 4
value 2 => 1 : 6
value 3 => 1 : 8
value 4 => 1 : 10
value 5 => 1 : 12
...etc.
1 : 1026
1 : 2050
1 : 4096
9