Safety Instructions And Responsibility; General Safety Instructions; Use According To The Intended Purpose - Hohner HM210IT Manual

www.hohner.it

1. Safety Instructions and Responsibility

1.1 General Safety Instructions

This operation manual is a significant component of the unit and includes important rules
and hints about the installation, function and usage. Non-observance can result in damage
and/or impairment of the functions to the unit or the machine or even in injury to persons
using the equipment!
Please read the following instructions carefully before operating the device and observe
all safety and warning instructions! Keep the manual for later use.
A pertinent qualification of the respective staff is a fundamental requirement in order to
use these manual. The unit must be installed, connected and put into operation by a
qualified electrician.
Liability exclusion: The manufacturer is not liable for personal injury and/or damage to
property and for consequential damage, due to incorrect handling, installation and
operation. Further claims, due to errors in the operation manual as well as
misinterpretations are excluded from liability.
In addition the manufacturer reserve the right to modify the hardware, software or
operation manual at any time and without prior notice. Therefore, there might be minor
differences between the unit and the descriptions in operation manual.
The raiser respectively positioner is exclusively responsible for the safety of the system and
equipment where the unit will be integrated.
During installation or maintenance all general and also all country- and application-specific
safety rules and standards must be observed.
If the device is used in processes, where a failure or faulty operation could damage the
system or injure persons, appropriate precautions to avoid such consequences must be
taken.

1.2 Use according to the intended purpose

The unit is intended exclusively for use in industrial machines, constructions and systems.
Non-conforming usage does not correspond to the provisions and lies within the sole
responsibility of the user. The manufacturer is not liable for damages which has arisen
through unsuitable and improper use.
Please note that device may only be installed in proper form and used in a technically
perfect condition - in accordance to the "Technical Specifications" (see chapter 8). The
device is not suitable for operation in explosion-proof areas or areas which are excluded by
the EN 61010-1 standard.
Rev. 1 HM210IT User's Manual 3