Cannot Hear Bluetooth Music; Music Cuts Out Or Delays Sometimes - Denon HOME 150 NV Owner's Manual

Contents
Cannot connect the speaker to the network
Make sure your mobile device is connected to your wireless network before setting up your speaker. (v p. 11)
0
Alternatively, you can connect your speaker to your network router using an Ethernet cable sold separately. Once connected via Ethernet, the HEOS
0
app should recognize the speaker and you can manually move it to your wireless network using "Settings" - "My Devices" - ("Device Name") -
"Advanced" - "NETWORK SETTINGS". (v p. 12)
Cannot pair a Bluetooth mobile device with the speaker
The connection from the Bluetooth mobile device is malfunctioning. Power cycle the mobile device, remove the pairing information and re-pair the
0
speaker to the mobile device.

Cannot hear Bluetooth music

Your Bluetooth mobile device is not paired with speaker. Re-pair the speaker to the mobile device.
0
The speaker is Wi-Fi mode or Aux-in mode etc. Pair and connect Bluetooth device to speaker.
0
The Bluetooth mobile device is connected to another audio device. Make sure your Bluetooth device is connected to speaker.
0
The volume on Bluetooth mobile device is too low. Check the volume on the Bluetooth mobile device. Check the volume on the speaker.
0

Music cuts out or delays sometimes

Make sure your Internet connection is operating correctly. If you are sharing your network with other users or devices, they may be using most of your
0
bandwidth (especially if they are streaming video).
Make sure your speakers are within range of your wireless network.
0
Make sure your speakers are not located near other electronic devices that could interfere with it's wireless connectivity (like microwave ovens,
0
cordless phones, TVs, etc...).
Setup Playback Troubleshooting
33
Status LED Appendix