3-2. CONVERGENCE
horizontal size, and vertical size.
@
Minimize the brightness setting.
®@
Provide dot pattern.
(1) Horizontal and vertical static convergence
Center dot
SCREEN
1.
(Moving
horizontally),
adjust
the
H.STAT
control so that the red, green, and blue points
are
on top of each other at the center of the
screen.
(In this case, the H.STAT variable resistor and
the V.STAT magnet influence each other)
295 =.
If the V.STAT magnet is moved in the direction
of the @ and ® arrows, the red, green, and blue
points move as shown below.