Advertisement
TROUBLESHOOTING
used.
if the trouble cannot be rectified even after exercising the checks listed below, ask your nearest PIONEER authorized service center or your
dealer to carry out repair work.
e
Reconnect the power cord.
e@
Has the power cord been disconnected?
e
Connect them properly to the TUNER terminals
e
Connect the antenna properly.
Noise
@
Have any of the output cords been disconnected or
incorrectly connected?
e
Has the antenna
been
disconnected
or is the
connection loose?
@
Was the power cord unplugged for several days?
(Station memory has been lost.)
:
Memorize the stations once again.
Tune in the station correctly.
e
Is the station properly tuned in to the correct
frequency?
e
Has the antenna
been
disconnected
or is the
connection loose?
Connect the antenna properly.
Sound distortion.
[On the FM band}
@
The T-type FM antenna has not been extended, or
itis not properly orientated.
e
Are the signals weak and reception poor?
e
Extend both ends fully, and face it in the di-
rection giving best reception.
e
Replace the supplied T-type FM antenna for an
outdoor antenna.
e
Set the Mono button to the ON position.
(The broadcast will be received in monaural.)
e
Try changing the antenna installation place. If
you are using an outdoor antenna, move it
away from the street.
e
Static
from
other
appliances
(particularly
automobiles) or multipath reflection (radio waves
reflected off mountains and tall buildings, hence not
received directly).
{On the AM band]
e
Poor positioning of AM loop antenna?
e
Change antenna direction, and set it in the
position giving best reception.
Move the loop antenna away from the unit.
e@
The supplied AM loop antenna is in contact with the
unit.
e
Are the signals weak and reception poor?
e
Install and connect an external AM antenneand
ground the unit.
e
Stop using the noise-generating equipment, or
move it away.
@
Noise from other electrical appliances (fluorescent
light/motors).
Use a multi-element FM antenna.
e
Antenna
input is insufficient because
of weak
broadcast signals.
Monaural mode is on.
FM stereo broadcasts not
received in stereo.
e
Set the Mono button to the OFF position.
20
<ARE7010>
En
Advertisement
