Advertisement
OptiXstar B866G-P1 Quick Start
Indicator
Power
LOS
PON
FTTR
SYS
WLAN
ACS
Issue 03 (2024-01-25)
5
B866G-P1 Indicator Description
Status
Steady green
Off
Blinking red
Off
Steady green
Blinking green
Off
Steady green
Off
Steady red
Blinking red
Steady green
Blinking green
Off
Steady green
Blinking green
Off
Steady green
Copyright © Huawei Technologies Co., Ltd.
5 B866G-P1 Indicator Description
Description
The power supply is working properly.
The power supply is shut down or faulty.
The receive optical power is lower than the receiver
sensitivity.
The receive optical power is normal.
The device has been activated.
The device is being activated.
The device is not activated.
An ONU connected to the PON port is online or
services are running.
No ONU connected to the PON port is online.
The device is faulty.
The system is too busy (the CPU or memory usage
exceeds the threshold).
The system is running properly. A connection is set
up and an IP address is obtained.
The system is running properly. A connection is set
up but no IP address is obtained.
No network connection is available.
The WLAN function is enabled, but there is no
service traffic.
The WLAN function is enabled and there is service
traffic.
The WLAN function is disabled.
The device is connected to the NMS but there is no
10
Advertisement
