Advertisement
OptiXstar B866G-P1 Quick Start
No.
4
5
6
7
8
Issue 03 (2024-01-25)
Interface
Description
PON
Connects to an upstream fiber.
NOTE
When connecting an upstream fiber, check whether the optical power of
the upstream fiber is within the range of –8 dBm to –28 dBm.
FTTR
Connects to an FTTR ADU through a fiber.
LAN1/WAN
Connects to a computer, an IP STB, or a router and provides 10
to LAN 4
Mbit/s, 100 Mbit/s, and 1000 Mbit/s adaptive Ethernet access
rates. If you need to access an extranet, use the LAN1/WAN port.
TEL
Telephone port, which is used to connect to a telephone, fax
machine.
Reset
Press and hold the button for 1 second and release it to reset
the system.
Press and hold the button for 2–10 seconds to restore the
system configurations.
Press and hold the button for 20 seconds or longer to restore
the device to its factory settings.
NOTE
Restoring factory settings will clear user configuration data. Exercise
caution when performing this operation
The button duration varies depending on the device configuration.
Copyright © Huawei Technologies Co., Ltd.
4 B866G-P1 Cable Connection
9
Advertisement
