Indicator Description - Huawei HG8110 Series Quick Start Manual

Indicator Description

Table 1 Indicator status description 1
Indicator
CATV
TEL1–TEL2
LAN1–LAN4
LOS/PON
POWER
Table 2 Indicator status description 2
Status
No.
PON
1 Off
Blinks twice
2
a second
3 Steady on
4 Off
Blinks twice
5
a second
Blinks once
6
two seconds
Status
Steady on
Off
Steady on
Blinking
Off
Steady on
Blinking
Off
See Table 2.
Steady green
Off
Status
LOS
Off
Off
Off
Blinks once
two seconds
Blinks twice
a second
Blinks once
two seconds
Description
The CATV function is enabled and CATV signals
are received.
The CATV function is disabled or CATV signals
are not received.
The ONT is registered with the softswitch but no
service flows are transmitted.
Service flows are transmitted.
The ONT is not powered on or fails to be
registered to the softswitch.
The Ethernet connection is in the normal state.
Data is being transmitted on the Ethernet port.
The Ethernet connection is not set up.
The terminal is powered on.
The power supply is cut off.
The GPON terminal is prohibited by the upper-
layer device, contact the service provider for
help.
The GPON terminal attempts to set up a
connection with its upper-layer device.
A connection is set up between the GPON
terminal and its upper-layer device.
The GPON terminal is not connected to optical
fibers or does not receive optical signals.
The GPON terminal is a rogue terminal,
contact the service provider for help.
The hardware is faulty.
8
Description