Yamaha FZ6 2006 Owner's Manual page 24

INSTRUMENT AND CONTROL FUNCTIONS
G
a tachometer (which shows engine
speed)
G an odometer (which shows the to-
tal distance traveled)
G two tripmeters (which show the
distance traveled since they were
last set to zero)
G
a fuel reserve tripmeter (which
3
shows the distance traveled since
the left segment of the fuel meter
started flashing)
G
a clock
G
a fuel meter
G
a coolant temperature display
G
an air intake temperature display
G a self-diagnosis device
G an LCD and tachometer bright-
ness control mode
NOTE:
Be sure to turn the key to "ON" before
using the "SELECT" and "RESET" but-
tons.
Tachometer
1. Tachometer
2. Tachometer red zone
The electric tachometer allows the rider
to monitor the engine speed and keep it
within the ideal power range.
When the key is turned to "ON", the ta-
chometer needle will sweep once
across the r/min range and then return
to zero r/min in order to test the electri-
cal circuit.
CAUTION:
Do not operate the engine in the ta-
chometer red zone.
Red zone: 14000 r/min and above
3-8
Clock
1. Clock
2. Speedometer
The clock displays when the key is
turned to "ON". In addition, the clock
can be displayed for 10 seconds by
pushing the "SELECT" button when the
main switch is in the "OFF", "LOCK" or
" " position.
To set the clock
1. Turn the key to "ON".
ECA10031
2. Push the "SELECT" button and
"RESET" button together for at
least two seconds.
3. When the hour digits start flashing,
push the "RESET" button to set the
hours.