RADH Electric Radiant Heaters NOTE: Please familiarize yourself with these instruc- C. Do not stack or store combustible materi- tions before attempting to install or connect this Radi- als directly below the heater or in the space a distance of 5 feet from any projected edge of ant Heater.
Page 3
Mounting Mounting Frame FIRE HAZARD. Since heaters are capable of developing high temperatures, extreme care should be taken to maintain adequate spacing Insulation between heater and combustible materials. Failure to comply can result in personal injury Reflector or property damage. Spacer Sheet 1.
Page 4
Wiring 7. Tighten the terminal nut securely with a wrench. NOTE: Where circuit wiring is installed in locations of high ambient temperature, conductors should be ELECTRIC SHOCK HAZARD. Disconnect all insulated in accordance with requirements for tem- power before installing or servicing heater. perature and voltage.
See ceeds ambient temperature, in cases where high work Chromalox Radiant Heater Manual for further infor- temperatures are desired, it is necessary to enclose the mation regarding Input Controllers and Contactors.
Page 6
Renewal Parts Identification Miscellaneous Hardware Miscellaneous Parts Screws Ref. # Description Part Number Ref. # Description Part Number Terminal Lock 303-016367-001(2) #8 X 1” Lg. 248-075519-095(6) Speed Nuts 272-048153-005(4) #8 X 3/8” Lg. 248-075519-080(4) Terminal Block 303-014326-001(2) #8-32 X 3/8” Lg 248-075512-053(4) Terminal Block Set Heater Mounting Clamp Assembly...
Page 7
Catalog Element Model Volts Watts Number Reflector Sheet Insulation Bushing Element Support Clip RTUH-207-120V RADH-207 234-013411-024 ––––– ––––– RTUH-207-240V RADH-310 1000 RTUH-310-240V 234-013411-025 ––––– ––––– RADH-418 1800 RTUH-418-240V 234-013411-027 032-013454-001 (2) 059-013424-001 RADH-525 2500 RTUH-525-240V 234-013411-029 032-013454-001 (6) 059-013424-001 (3)