Washing Programs - Smeg CL6S-4 Instruction Manual

TABLE FOR CERTIFICATION BODIES
Reference standard
Reference program
Load
Type of detergent
Amount of detergent
Rinse aid setting
3.2
Before starting a washing program make sure that:
•
•
•
•
•
HALF LOAD WASH SETTING
This function is especially suitable for loads up to 6 place settings and allows saving of water and
electricity. It is controlled by the HALF LOAD button (3) and allows washing in the upper basket
only.
IMPORTANT: at the end of the program remember to deactivate the function to ensure the next
wash is not also carried out in half load mode by mistake.
A cutlery basket can be placed in the upper basket , while the lower basket must be left empty.
CAUTION: there is no point in loading dishes and cutlery in the lower basket, since the jet of
water will only reach the upper basket.
CANCELLING THE CURRENT PROGRAM
To cancel the program in progress the dishwasher must be switched off by pressing the ON/OFF
key (2). Turn the program selector to SOAK and wait for the dishwasher to start. On completion of
the program, switch off the dishwasher by pressing the ON/OFF key (2).
CHANGING THE PROGRAM
To change the program in progress the dishwasher must be switched off by pressing the ON/OFF
key (2). Turn the program selector to the program required and then switch the dishwasher on
again by pressing ON/OFF key (2). The dishwasher will carry out the new program automatically.
10
User instructions

Washing programs

The water supply tap is open.
The correct amount of detergent has been added to the dispenser .
The baskets have been correctly loaded.
The spray arms are able to rotate freely and without obstruction.
The dishwasher door is securely closed .
(*) Selector on 4
12 place-settings
Depending on the model 3/4 or 4/6
EN 50242
EN 50242
B
30 g