Operation; Charging The Battery Pack - Toro Flex-Force Power System 88924 Operator's Manual

Operation

Charging the Battery Pack

Important:
The battery pack is not fully charged when you purchase
it. Before using the tool for the first time, place the battery pack in
the charger and charge it until the LED display indicates the battery
pack is fully charged. Read all safety precautions.
Important:
Charge the battery pack only in temperatures that are
within the appropriate range; refer to
Note:
At any time, press the battery-charge-indicator button on the
battery pack to display the current charge (LED indicators).
1. Ensure that the vents on the battery charger are clear of any dust
and debris.
1. Battery pack cavity
2. Battery-charge-indicator button
3. LED indicators (current charge)
2. Line up the cavity in the battery pack
the charger.
3. Slide the battery pack into the charger until it is fully seated
Specifications (page
Figure 3
4. Handle
5. Charging mode button and indicator
lights
6. Charger venting areas
(Figure
10
9).
3) with the tongue on
(Figure
g469062
3).