Operation; Charging The Battery Pack - Toro Flex-Force Power System 86910 Operator's Manual

Operation

Charging the Battery Pack

Important:
Charge the battery pack only in temperatures that are
within the appropriate range; refer to
Note:
At any time, press the battery-charge-indicator button on the
battery pack to display the current charge (LED indicators).
1. Line up the cavity in the battery pack
the charger.
1. Battery pack cavity
2. Battery pack terminals
3. Battery-charge-indicator button
2. Slide the charger into the battery pack until it is fully seated
3. To remove the battery pack, slide the charger backward out of the
battery pack.
Specifications (page
(Figure
Figure 3
4. LED indicators (current charge)
5. Handle
7
6).
3) with the tongue on
(Figure
g474968
3).