Related Manuals for Toro Flex-Force Power System 88924
Summary of Contents for Toro Flex-Force Power System 88924
- Page 1 Form No. 3466-763 Rev A Flex-Force Power System ® 4 AMP 60V MAX 2-Pod Battery Charger Model No. 88924—Serial No. 324000000 and Up *3466-763* Original Instructions (EN)
- Page 2 WARNING CALIFORNIA Proposition 65 Warning The power cord on this product contains lead, a chemical known to the State of California to cause birth defects or other reproductive harm. Wash hands after handling. Use of this product may cause exposure to chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm.
- Page 3 Whenever you need service, genuine the manufacturer parts, or additional information, contact an Authorized Service Dealer or distributor, or the tool manufacturer’s Customer Service, and have the model and serial numbers of your product ready. Figure 1 identifies the location of the model and serial numbers on the product.
-
Page 4: Safety Alert Symbol
Safety-Alert Symbol The safety-alert symbol (Figure 2) shown in this manual and on the machine identifies important safety messages that you must follow to prevent accidents. g000502 Figure 2 Safety-alert symbol The safety-alert symbol appears above information that alerts you to unsafe actions or situations and is followed by the word DANGER, WARNING, or CAUTION. - Page 5 chargers only. Other brands of battery packs may burst, causing personal injury and damage. WARNING—Plugging the battery charger into an outlet that is not 120V can cause a fire or electric shock. Do not plug the battery charger into an outlet other than 120V. For a different style of connection, use an attachment plug adapter of the proper configuration for the power outlet if needed.
- Page 6 water. If the liquid contacts your eyes, seek medical help. Liquid ejected from the battery pack may cause irritation or burns. Do not expose a battery pack or tool to fire or excessive temperature. Exposure to fire or temperature above 130°C (265°F) may cause explosion.
-
Page 7: Safety And Instructional Decals
Safety and Instructional Decals Safety decals and instructions are easily visible to the operator and are located near any area of potential danger. Replace any decal that is damaged or missing. decal161-7065 161-7065 decal161-3788 161-3788... - Page 8 decal161-3793 161-3793 1. Charging mode 4. The battery pack is over button or under the appropriate temperature range. 2. The battery 5. Battery pack pack is fully charging fault charged. 3. The battery pack is charging.
-
Page 9: Product Overview
Product Overview Specifications Battery Charger Model 88924 Type 60V MAX 2-Pod Lithium-Ion Battery Charger Input 120V AC ~4.7A, 60Hz Output 60V DC 4A MAX Appropriate Temperature Ranges Charge battery pack at 5°C (41°F) to 40°C (104°F)* Use battery pack at -30°C (-22°F) to 49°C (120°F) Store battery pack/charger at 5°C (41°F) to 40°C (104°F)*... -
Page 10: Operation
Operation Charging the Battery Pack Important: The battery pack is not fully charged when you purchase it. Before using the tool for the first time, place the battery pack in the charger and charge it until the LED display indicates the battery pack is fully charged. - Page 11 If multiple battery packs are connected to the charger, you can switch between batteries or charge both at the same time by pressing the charging mode button on the side of the charger. Note: The LED indicator lights to the left and right of the button tells you which side (or sides) are currently charging.
-
Page 12: Maintenance
Maintenance Maintenance and servicing are not required under normal conditions. When you clean the surface of the equipment, wipe it only with a dry cloth. Do not disassemble the equipment; if it is damaged, contact your Authorized Service Dealer or distributor. Storage Important: Store the tool, battery pack, and charger only in... -
Page 13: Troubleshooting
Troubleshooting Perform only the steps described in these instructions. All further inspection, maintenance, and repair work must be performed by an authorized service center or a similarly qualified specialist if you cannot solve the problem yourself. Problem Possible Cause Corrective Action The battery pack loses 1. - Page 14 Problem Possible Cause Corrective Action The LED fault indicator 1. There is an error in 1. Remove the battery light on the battery charger the communication pack from the battery is blinking red. between the battery charger, unplug the pack and the charger. battery charger from the outlet, and wait 10 seconds.
- Page 15 Notes:...
- Page 16 California Proposition 65 Warning Information What is this warning? You may see a product for sale that has a warning label like the following: WARNING: Cancer and Reproductive Harm—www.p65Warnings.ca.gov. What is Prop 65? Prop 65 applies to any company operating in California, selling products in California, or manufacturing products that may be sold in or brought into California.