Table of Contents
Advertisement
•
The next time you press the C key, the set temperature display for the compartment with excessive
temperature will start to flash. At the same time, the symbol for the compartment in which the
temperature is too high will also be lit up (B1 or B2).
•
When the temperature drops to below the alarm value, then the temperature display will stop
flashing and it will be lit continuously. Refrigerator compartment temperature will be displayed
and the B2 symbol will light up.
Open door alarm
If the refrigerator or freezer compartment door is open for too long, an acoustic alarm (repetitive beep)
will be activated. If you do not acknowledge and switch off the acoustic alarm, then it will be activated
every hour until it is switched off.
The appliance will continue to operate as if the door was closed.
To switch off the alarm: to switch off the alarm, close the appliance door.
INFORMATION!
If you switch off the alarm by pressing any key, the alarm will be reactivated in 4 minutes if the
door is still open.
INFORMATION!
If you leave the door open for more than 10 minutes, the alarm will no longer be sounded.
Appliance operation will switch to safe mode in order to provide sufficient cooling and prevent
food spoilage despite the open door.
Power outage/power supply failure alarm
When you press the B key again, the power supply failure alarm will be finally deactivated, and the
set temperature for the selected compartment will appear on the C1 display unit.
If the high temperature alarm is activated at the same time, it will operate as described in the chapter
High temperature alarm, after you have deactivated the power supply failure alarm.
24
If the temperature in the appliance reached the alarm level during the
power outage, then the high temperature alarm will be activated when
power supply is restored. Acoustic alarm will be sounded, and PF will
flash on the display unit C1.
To acknowledge and turn off the acoustic alarm signal, press any key.
The highest measured temperature of the freezer compartment will be
displayed on the C1 display unit, and the B1 symbol will light up.
The next time you press the B key, the highest measured temperature
of the refrigerator compartment will be displayed, and the B2 symbol will
be lit up.
Advertisement
Table of Contents
