Table of Contents
Advertisement
Extreme freezing (upper drawer of the freezer compartment): This feature only works in the upper
drawer of the freezer compartment. It relies on intensive supply/blowing of cool air. Faster freezing
will retain more vitamins, minerals, and nutrients in the food for a longer period of time.
•
Refrigerator compartment temperature can be set or adjusted while intensive freezing function is
activated. You may do so when the B2 symbol is lit up. Set the temperature by briefly pressing
the C key. The intensive freezing function remains activated nevertheless.
INFORMATION!
•
When the intensive freezing (fast freeze) function is activated, the appliance will operate with
maximum power. During this time, operation may be temporarily somewhat louder.
INFORMATION!
•
When the intensive freezing (super freeze) function is activated, temperature may be lower
both in the refrigerator and the freezer compartment.
22
To activate: press the D key to activate the intensive freezing (super
freeze) function. You will hear a beep and indicators B1 and D1 will light
up. FF will appear on the display unit C1. FF will be lit up as long as the
function is active if display B1 is selected with the B key.
After 30 seconds, the display will automatically switch to the refrigerator
compartment display
set for the refrigerator compartment will be displayed on the C1 display
unit. Symbol D1 will be lit up as long as the function is active.
Switching off: if the refrigerator compartment is active (B2 is lit up), then
first press the B key to switch to the freezer compartment (B1 will be lit
up), and then press the D key to deactivate the function.
If the freezer compartment is activated (symbol B1 is lit), then press the
D key to deactivate the function.
•
After the intensive freezing function is deactivated, the freezer
temperature setting returns to the most recent setting selected before
the intensive freezing function was activated.
•
In case of a power supply failure or outage, the function will be
reactivated.
If the function is not deactivated manually, it will be deactivated
automatically after approximately two days. The setting returns to the
most recent value.
the symbol B2 will light up and the temperature
Advertisement
Table of Contents
