Cooking Duration; Noises; Heating-Up Phase; Cooking Phase - Miele DGC 7840 HCX Pro Operating And Installation Instructions

Combination steam oven
Hide thumbs Also See for DGC 7840 HCX Pro:
Table of Contents

Advertisement

Cooking duration

Depending on the function, you can set
a cooking duration of between 1 minute
and 6, 10 or 12 hours.
The cooking durations of the Automatic,
Maintenance and
grammes are set at the factory and can-
not be altered.
When cooking with steam, as well as for
programmes and applications with pure
steam operation, the cooking duration
does not begin until the set temperature
is reached. It starts immediately for all
other functions, programmes and ap-
plications.

Noises

A humming sound can be heard during
operation and after switching off the
combination steam oven. This noise
does not indicate incorrect operation or
an appliance fault. The noise is made by
water being pumped through the sys-
tem.
When the combination steam oven is in
use, you will hear a fan noise.

Heating-up phase

In all functions, the display shows the
temperature in the oven compartment
as it rises during the heating-up phase
(exceptions:
Full grill
 ).
grill
When cooking with steam, the duration
of the heating-up phase will depend on
the quantity and the temperature of the
food. In general, the heating-up phase
will last for approx. 7 minutes. The dura-
tion will be longer if you are cooking re-
frigerated or frozen food. The heating-up
phase may also last longer if cooking
temperatures are low or if you are using
the
  cooking function.
Sous-vide
 pro-
Menu cooking
 ,
Economy
Description of functions

Cooking phase

The elapsing remaining time is shown in
the display during the cooking phase.
When cooking with steam, the cooking
phase begins once the set temperature
is reached. It starts immediately for all
other functions, programmes and ap-
plications.

Steam reduction

With steam cooking and combination
cooking, the steam reduction function
will switch on automatically at the end
of a cooking programme which uses a
temperature within a certain temperat-
ure range. The function stops excessive
steam escaping when the door is
opened.
Steam reduction
the display.
Steam reduction can be switched off
(see "Steam reduction" in the "Set-
tings" chapter). With steam reduction
switched off, a lot of steam will escape
when the door is opened.

Oven interior lighting

For energy-saving reasons, the combin-
ation steam oven interior lighting has
been set at the factory to go out once a
programme has begun.
If you want it to stay on all the time the
oven is on, you will need to alter the de-
fault setting (see "Settings" – "Light-
ing").
If the door is left open at the end of a
cooking process, the oven interior light-
ing will switch off automatically after
5 minutes.
The lighting can be switched on for
15 seconds by touching the  sensor
control on the control panel.
will appear in
31

Advertisement

Table of Contents
loading

Table of Contents