your choice. These recovery questions can be used in case you have lost the admin
password you have set.
❖ Setting the camera on an NVR: Once set on an NVR, the IPC will be activated
automatically.
4) Binding
Important: Binding can be done only AFTER an account was created on CAM2 app.
1. Go to System > Basic Information
2. Make sure you have the
3. Open the Provision CAM2 mobile app and add the doorbell by scanning the QR code
installed.
latest FW
6
Video Doorbell Quick Guide
Need help?
Do you have a question about the DB-320WIPN and is the answer not in the manual?