1. Manuals
  2. Brands
  3. Provision ISR Manuals
  4. Intercom System
  5. INT-320WIPN
  6. User manual

Provision ISR INT-320WIPN User Manual

Outdoor intercom
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Outdoor Intercom
User manual
Models:
• INT-320WIPN

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the INT-320WIPN and is the answer not in the manual?

Questions and answers

Related Manuals for Provision ISR INT-320WIPN

Summary of Contents for Provision ISR INT-320WIPN

  • Page 1 Outdoor Intercom User manual Models: • INT-320WIPN...

  • Page 2: Table Of Contents

    INT-320WIPN User Manual Terms & Conditions ..........................4 Camera Activation ..........................5 Remote Access............................6 3.1) LAN ..............................6 3.1.1) Access through the IP Manager Tool ....................6 3.1.2) Direct Access through Web-Browser ....................7 3.2) WAN..............................8 3.2.1) Direct Access through IP/DDNS ...................... 8 3.2.2)
  • Page 3 INT-320WIPN User Manual 5.9) Alarm Configuration .......................... 29 5.9.1) Camera Tampering ........................29 5.9.2) General Fault ..........................30 5.9.3) Alarm In ............................30 5.9.4) Alarm Out............................31 5.9.5) Alarm Server ..........................31 5.10) Network ............................. 31 5.10.1) TCP/IP ............................31 5.10.2)

  • Page 4: Terms & Conditions

    INT-320WIPN User Manual 1) Terms & Conditions • We strongly advise users to read this manual and keep it for later use for proper and safe device usage. • Please use the provided & authorized by Provision-ISR technician power supply and power source indicated on the marking label.

  • Page 5: Camera Activation

    INT-320WIPN User Manual 2) Camera Activation The camera's default state is “Inactive”. This means that the camera must be activated before it can be used. The camera can be activated by 3 methods: 1. IP Manager Tool: Select the camera(s) you wish to activate, set the new admin password and click activate (Note: the activation password must contain at least 8 characters and include 1 letter, 1 number, and 1 special character).

  • Page 6: Remote Access

    INT-320WIPN User Manual 3) Remote Access Cameras running FW version >5.1.1 support all modern browsers (Chrome, Firefox, Safari, Opera, Edge), and can also work on Edge in IE mode. 3.1) LAN In LAN, there are two ways to access IPC: 5.

  • Page 7: 2) Direct Access Through Web-Browser

    INT-320WIPN User Manual Please note: ❖ The IP range must fit the number of chosen cameras. ❖ The selected IP addresses in the specified range must be available. For example, if the IP address of your computer is 192.168.1.4, then the IP address of the cameras should be changed to 192.168.1.x.

  • Page 8: Wan

    INT-320WIPN User Manual 2. If you wish to access the camera using its default IP address (192.168.226.201) you will have to manually set the IP address of the PC to be in the same IP segment as the default settings of the IP camera. Open the network and sharing center.

  • Page 9: 2) Access Through Nat/P2P

    INT-320WIPN User Manual HTTP Port (Default is 80) is for HTTP and API Data Port (Default is 9008) is for IE video data and SDK WebSocket Port (Default is 9681) is for modern browser video streaming 3.2.2) Access through NAT/P2P P2P allows indirect connection to the camera without the need for port forwarding and virtual server triggers on the router.

  • Page 10: Live Preview

    INT-320WIPN User Manual 4) Live Preview 4.1) Live View Interface Icons and operation buttons: Icon Description Icon Description Actual Video Size Face Detection/Recognition Fit to screen – True Proportions Digital Zoom-in Fit to screen - Stretch Digital Zoom-Out Full-screen Motion Detection indicator...

  • Page 11: Ipc Configuration

    INT-320WIPN User Manual 5) IPC Configuration In this chapter, we will go through all the possible configurations of the IPC. 5.1) System Configuration The “System Configuration” includes four submenus: Basic Information, Date & Time, Local Config, and Storage. 5.1.1) Basic Information In the “Basic Information”...

  • Page 12: 2) Date & Time Configuration

    INT-320WIPN User Manual Additional information can be found when clicking on “About this machine”. The relevant details are below Parameter Explanation Hardware version The hardware identifier of the device Kernel version The kernel version of the device Video Structured The AI engines version on the current firmware version 5.1.2) Date &...

  • Page 13: Local Config

    INT-320WIPN User Manual 5.2) Local Config Go to “System Configuration” →“Local config” as shown below: Using an older IE web browser will open the following interface From here you can set the path on your computer where local snapshots and videos will be saved.
  • Page 14 INT-320WIPN User Manual If it is the first time you are using the SD card with the camera or if the state is showing any value different than “Normal”, you should click on “Format” before the SD card will be available for recording.
  • Page 15 INT-320WIPN User Manual The next tab is “Record”. Click on it to set the video recording parameters and schedule. The video parameters are as follows: Parameter Meaning Record stream Which video stream will be used to record Pre-recording time The duration of the video before the recording...

  • Page 16: Face

    INT-320WIPN User Manual The next tab is “Snapshot” Click on it to set the snapshot parameters and schedule. The snapshot parameters are as follows: Parameter Meaning Image Format The image format is JPEG Resolution Set the snapshot resolution Image quality The quality of the image reflects its size.
  • Page 17 INT-320WIPN User Manual Options: Explanation: Liveness Detection Use dual lens and IR technology to confirm that the face is a real human face with 3D feauteres. Save source information Wether to keep the full scene image in case of face...
  • Page 18 INT-320WIPN User Manual Options: Explanation: Deduplication Period During the specified period, delete duplicate comparison results. Similarity Threshold When the similarity between the captured face image and the face image in the database exceeds the defined threshold, alarms will be triggered.

  • Page 19: 2) Face Database Management

    INT-320WIPN User Manual 5.4.2) Face Database Management Here you will manage your face database. You can add, edit and delete faces from this interface. There are four ways to add face pictures: Adding face pictures one by one: Click to open the "Add User" icon to open the following interface: Click on the “Add image icon”...

  • Page 20: Rfid Key-Fob Registration

    6. Click on the “Card NO.” field (Do not input any data) 7. Present the RFID card to the INT-320WIPN RFID reader. You will hear an audio prompt “Badge read correctly” and the Key fob number will be filled automatically.

  • Page 21: Access Control

    INT-320WIPN User Manual 5.6) Access Control Settings and management of the integral access control feature of the intercom. 5.6.1) Access Control System Config In the “Config” tab you can set the basic features of the intercom as described below: Options:...

  • Page 22: 3) Door Contact Setting

    INT-320WIPN User Manual 5.6.3) Door Contact Setting Each door lock interface also has a door sensor that detects if the door is open or closed. If needed, you can set an alarm for events where the door is kept open longer than the allowed duration.

  • Page 23: 4) Door Lock

    INT-320WIPN User Manual 5.6.4) Door Lock Here you can set the door lock features and configurations, together with password configurations for opening the door. 5.6.4.1) Config Here you can set the door lock features and configurations Alarm Triggers: Explanation: Unlocking Group...

  • Page 24: 5) Wiegand Config

    INT-320WIPN User Manual 5.6.4.2) Password Configuration Password configurations for opening the door. The Supervisor password is a PIN that opens the door in any state or condition. It must be made from 4 digits You can also set 3 wide range passwords that can be used by any user when the door opening mode contains password.

  • Page 25: Intercom

    INT-320WIPN User Manual Please note: ❖ A professional card enroller is required to encrypt the cards. If you wish to use the card encryption feature, you must purchase a card enroller and complete the necessary setup in advance 5.7) Intercom Configure from here the intercom communication and dialing platforms.
  • Page 26 INT-320WIPN User Manual The display parameters are as follows: Parameter Meaning Config file* You can set an individual configuration for Day and night. Common is used for both Brightness Set the image brightness Contrast Set the image contrast Set the image hue...

  • Page 27: 2) Video/Audio

    INT-320WIPN User Manual *If you set the day/night mode to schedule or you wish to differentiate between the daytime and night-time image settings, you will need to set the profiles accordingly. Click on the “Profile Management” tab and set the schedule as you wish.

  • Page 28: 3) Osd Configuration

    INT-320WIPN User Manual Profile Baseline, main profile, and high profile are optional. A baseline profile is mainly used in interactive applications with low complexity and delay. The main or high profile is mainly used for higher coding requirements. Send Snapshot Please select it according to the actual situation.

  • Page 29: Alarm Configuration

    INT-320WIPN User Manual 5.9) Alarm Configuration Alarm configuration includes four submenus: General Fault, and Alarm Server. 5.9.1) Camera Tampering Camera tapering uses a special analytics algorithm to detect if the camera was tampered with. This analytics detects if the camera was shifted from its original location, covered or that the lens was tampered with.

  • Page 30: 2) General Fault

    INT-320WIPN User Manual 5.9.2) General Fault A problem with the network cable or with the SD card will produce a general fault. The alarms can be configured as follows: SD Card Full, SD Card Error, IP Address Conflict, Network cable disconnected.

  • Page 31: 4) Alarm Out

    INT-320WIPN User Manual 5.9.4) Alarm Out Alarm output is a relay activation from the camera cable. The alarm output has 4 work methods: 1. Alarm Linkage: Trigger of the alarm output as a trigger to another event 2. Manual: Manual activation/deactivation of the output 3.
  • Page 32 INT-320WIPN User Manual Manual IP Assignment: If you wish to set static IP addresses, choose “Use the following IP Address”, set the range of IP addresses you wish to assign (First and last address), set the gateway and subnet mask, and click on batch set. Wait for a few moments until the IP manager will configure the cameras.

  • Page 33: 2) Wifi Configuration

    INT-320WIPN User Manual 5.10.2) WiFi Configuration After the DB is up and running, you can go to the WiFi settings of the DB: 1. Go to Network > WiFi 2. Enable WiFi, and press “search” 3. Choose your WiFi network, and provide the proper password below.

  • Page 34: 3) Port

    INT-320WIPN User Manual 5.10.3) Port Go to “Network”→ “Port” to see the following interface: 1. HTTP Port (Default is 80) is for HTTP and API 2. Data Port (Default is 9008) is for IE video data and 3. RTSP Port (Default is 554) is for RTSP video streaming 4.

  • Page 35: 6) Ddns

    INT-320WIPN User Manual 5.10.6) DDNS DDNS should be used when your ISP (Internet Service Provider) provides you with a dynamic valid IP. The DDNS will update your dynamic address and link it to a fixed domain. Enter into the "Network"→"DDNS" tab and set the DDNS as required.

  • Page 36: 9) Upnp

    INT-320WIPN User Manual 5.10.9) UPnP Go to “Network”→ “UPnP” interface as shown below. Select “Enable UPnP” and then input a friendly name. Then double-click the “Network” icon on the desktop of the PC to see an icon with the name and IP address of the camera.

  • Page 37: 11) Ftp

    INT-320WIPN User Manual SMTP Port The SMTP port. The default port will be used according to the secure connection choice but can be edited manually if required. Send Intervals The minimum time duration between 2 Emails that will be sent...

  • Page 38: 13) Https

    INT-320WIPN User Manual 5.10.13) HTTPS HTTPS (Secured HTTP) is used to establish a secured and encrypted connection between the camera and the client (IE in our case). This will prevent anyone on the network to be able to get information packets and other information by sniffing the network.

  • Page 39: 14) P2P

    INT-320WIPN User Manual Click on “OK”. Once the procedure is finished, the SSL certificate will be automatically installed as follows. Please note: ❖ Using this method will display an error message by the browser every time you connect to the camera, as the camera is not recognized as a certified SSL certificate issuer.

  • Page 40: 1) User

    INT-320WIPN User Manual 5.11.1) User Go to “Network” →“User” to access the following interface. Adding a user: Click on the “Add” button to pop up the “Add user” dialog box. Input the username, and password and confirm the password. Set the user type. 3 user types are available: ❖...

  • Page 41: 2) Online Users

    INT-320WIPN User Manual Editing the Security Questions: If you wish to set/edit the security questions used to recover your admin password, you can do so by clicking on “Security Question”. The following window will pop up: Choose 3 questions from the drop-down list and set the correct answers.

  • Page 42: 4) Security Management

    INT-320WIPN User Manual Go to “Network” →“Block and Allow Lists” to access the following interface. The lists can be based on IPv4/IPv6. Enable the filtering you wish to activate. 1. Choose the type of list you wish to create (block or allow) 2.

  • Page 43: Maintenance

    INT-320WIPN User Manual Ticking the “Trigger Mail” will send a mail to the selected recipients notifying them that the camera entered a “lock” state due to multiple failed login attempts. “Password security” allows the user to set the password required strength and password change policy.

  • Page 44: 2) Reboot Device

    INT-320WIPN User Manual Exporting settings: If you wish to export the configuration settings of the camera click on “Export”. Choose the location on your PC and set the file name. Click on “OK” to save the file in the desired location.

  • Page 45: Data Record

    INT-320WIPN User Manual 6) Data Record The data record is used to extract face detection/recognition events from the intercom, assuming that saving the face data is enabled and an SD card is available. 1. Set the time frame within you wish to search 2.
  • Page 46 INT-320WIPN User Manual 4. Set the search range. You can choose a single day and set a time range of up to 24 hours. (Full day). Once finished click on “Search” to show the results. 5. Double-click on the image/video from the list for it to show on the main playback window and to the playback queue.

  • Page 47: Binding With Provision Cam2 Mobile App

    INT-320WIPN User Manual Download the displayed image and queue list to your PC (SD Stop the slideshow Card search only) Fit the image to the screen Dwell time between images Display the image in real-size For Videos Icon Description Icon...

  • Page 48: Provision Cam2 Push Notifications

    INT-320WIPN User Manual 9. Click on “Add Device” in the server list 10. Use the phone camera to scan the QR code on the bottom of the Intercom page 11. The app will communicate with the server and recognize the intercom, then it will switch to the authentication page.

  • Page 49: Calling An Indoor Monitor (Mon-Tch7)

    INT-320WIPN User Manual 10) Calling an Indoor Monitor (MON-TCH7) There are 2 ways to call the indoor monitor. 1. Quick Call button: If you have only 1 monitor, the easiest way is to configure the “Quick Call” button. You can configure it by following the instructions in section 5.7.2) Call...
  • Page 50 INT-320WIPN User Manual Provision-ISR 11 Atir Yeda St, Kfar Saba, Israel Postal Code: 4442510 Tel: (972-9) 741 7511 Web: www.provision-isr.com...

Table of Contents