Rfid Key-Fob Registration; Pr-Chime Pairing (Optional); Pr-Chime Settings (Optional); Push Notifications - Provision ISR DB-320WIPN Quick Manual

7) RFID Key-Fob registration

The DB-320WIPN package contains 3 RFID Key Fobs. They are not pre-configured on the
device and has to be set up in order to work.
1. Access the device web page using the configured IP, port, username and password.
2. Browse to Settings→Access Control→User Management
3. Click on the "Add User" Icon
4. Set the List Type to "Allow List" (Default)
5. Input the name
6. Click on the "Card NO." field (Do not input any data)
7. Present the RFID Key Fob to the DB-320WIPN. You will hear an audio prompt "Badge
read correctly" and the Key fob number will be filled automatically.
8. Click on Entry to save.
9. If you need to add additional Key Fobs, repeat steps 3-8
If additional Key Fobs are needed, the RFID protocol is Mifare 13.56MHz. Please make sure
that the Key Fob you purchase has a number burnt on it.

8) PR-CHIME Pairing (Optional)

If you have purchased the optional PR-CHIME chime box, you will need to bind it first.
1. Open the PR-CHIME device and set the batteries. (Notice the polarity)
2. Click and hold the "Cog wheel" button on the PR-CHIME for 5 seconds (Or until you
hear a "Ding Dong" and the LED indicator is flashing red).
3. Click and hold on the DB-320WIPN "Ring" button for 5 seconds (Or until it will slowly
flash in blue color).
4. Once paired, the light will turn of and the chime will "Ding Dong" again.

9) PR-CHIME Settings (Optional)

The PR-CHIME ringtone and volume can be set using the PR-CHIME buttons. Once paired
with a DB-320WIPN doorbell, the PR-CHIME can also be configured via the DB-320WIPN
web interface through Settings→Access Control→Ring Device Configuration.
Through this interface you can also set the DND times (Do Not Disturb).

10) Push Notifications

Both the bound user and his shared accounts can choose which push notifications they want
to receive.
1. Go to main menu (Top right icon)
2. Click on "Push Notification Settings"
3. Click on the Doorbell camera
4. Choose your preferred notifications.
Video Doorbell Quick Guide
11