Epson C11C672001 User Manual page 111

Power Busy
Error associated with ink
Power Busy
Lights
Stacker
Error Ink
1 2
Lights
Stacker
Error Ink
1 2
Conditions/Remedies
3 4
Stacker 4 is full
Remove published discs from stacker 4.
Stacker 4 is open
Close stacker 4.
Conditions/Remedies
3 4
Ink low
Obtain a replacement ink cartridge. To
determine which cartridge is low, check the
ink cartridge status.
See "Checking the Ink Cartridge Status" on
page 89.
The ink has reached its replacement time or it
is not installed correctly.
Replace the ink cartridge or reinstall it.
If the ink cartridge is not recognized even if it
is installed correctly, there may be dirt on the
green circuit board. Wipe it with soft cloth
and install it again.
The product will stop operation before ink is
completely empty in order to maintain print
head quality. Therefore, some ink will be left
in the ink cartridge.
It is recommended to use a genuine ink
cartridge.
Ink cartridge not fully inserted
All Ink lights are on.
Check ink cartridges and make sure they are
all fully inserted.
111
Troubleshooting