Panasonic DVD-RV41 Operating Instructions Manual page 29

Home Theater-Enjoying more powerful sound
*
'
c Cbrtnecting an analog amplifier or
Gbmppnent
I
TZtF
> '
D Connecting a digital amplifier or
system component
B3SSS3ZII IHM
® Back of the unit
ESSiBSn
® Back of the unit
SUB- R |
| WQ0*£R | )
o®
® (Red)(White)
®@©
© Audio cable
© Optical digital
audio cable —
Do not bend
when connecting.
(Red)(White)
\ ® Insert fully, with
=^4-this side facing
AUXIN
>SeleCt -2_Channel page 22' Audio-Speaker Setting).
, .. • ^ Adjust the settings to suit the equipment you have con-
Select No in PCM Down Conversion" (-* page 25). nected (-* page 25).
To enjoy Dolby Pro Logic ~~ " " ~
• If you connect an amplifier with a Dolby Pro Logic decoder, you will also need to connect center and surround speakers to eniov
surround sound. Read the instructions for the equipment for connection details.
•Turn Advanced Surround and Bass Plus off (- page 14). The Dolby Pro Logic decoder will not function correctly if Advanced Surround
and Bass Plus is on.
You can enjoy more powerful bass by connecting an active subwoofer.
Audio cable
© To the subwoofer's
input terminal
• Place the subwoofer as close as possible to the front cent¬
er.
►Turn BASS PLUS on to boost the output from the subwoofer
(■»♦ page 14).
► Adjust the volume on the subwoofer to suit your preference.
cassette
HU iilSli
H Analog recording
You can record to an MD or cassette tape. Using analog connection
means sound will be unaffected by the copy guards found on DVDs.
B Digital recording
You can record the digital signal directly onto an MD.
To make an analog recording
1. Connect the recording equipment with an audio cable {«* Q
above).
2. Set "Speaker Setting" to ''2-channer page 22).
(If this is set to "Multi-channel", only the audio for the front 2
speakers will be recorded.)
The signals on DVDs will be converted to 48 kHz/16 bit linear PCM.
Ensure the following conditions are met.
•There is no copy guard recorded on the disc.
• The recording equipment can handle a sampling frequency of
48 kHz/16 bit.
To make a digital recording
1. Connect the recording equipment with an optical digital audio
cable (■» Q above).
2. When recording DVDs, change the digital audio output settings
{■» page 25).
PCM Down Conversion: Yes
Dolby Digital: PCM
DTS Digital Surround: Off
MPFftj- PPM