Using Gui Screens; Common Procedures. Ig; Screen For Disc Information; Shuttle Screen - Panasonic DVD-RV41 Operating Instructions Manual

Using GUI screens
: Remote control only
DVDIE33 E3
GUI (Graphical User Interlace) screens are menus that contain infor¬
mation about the disc or unit. These menus allow you to perform op¬
erations by changing this information,
Common procedures
1 Press [DISPLAY].
Each time you press the button:
—GUI screen for disc information (©)
l
GUI screen for unit information ((a))
1
Shuttle screen (©)
1
Original display (0)
•The screens depend on the disc contents.
2
GUI screen for unit information only
While
the
leftmost
icon is
highlighted
Press [A, ▼] to select the menu.
Each time you press the button:
—Play menu ((§))
i r
Video menu (0)s
1 t
Audio menu (Q)
1 1
—Display menu ((£))
Only DVD-RV41 for all regions and
DVD-RV31 for Australia. N.Z. arid Asia
3
Press [◄, ►] to select the item.
4
Press [A, ▼] to select the setting.
Items with "A" or *▼" above and below can be changed by
(A. T). Other items use different buttons. See page 20 for
details.
For your reference
•Some functions cannot be accessed from the stop mode (e g.
changing the soundtrack language).
•Press [ENTER] if the setting does not change after pressing [AT]
•When numbers are displayed (e g. titlo No.), the numbered buttons
are also effective for setting. When numbers are entered with the
numbered buttons, press [ENTER] to register the sotting.
To clear the GUI screen
Press [RETURN]
When [RETURN] is pressed while one of the icons for unit informa¬
tion is highlighted, the leftmost icon is highlighted. The screen is
cleared when you press [RETURN] whilo the leflmost icon is high¬
lighted.
■ To change the position of the GUI screens
You can lower the position of the GUI screens if they are cut oft for
some reason. There are 5 positions to choose from.
1. Press | ◄ ► ] to select tho rightmost icon. K9
2. Press | A . T] to movo the GUI screen. D