Speaker Setting.24 - Panasonic DVD-RV41 Operating Instructions Manual

tMW 'firjW
Changing initial settings
DVD |
2.6 ms
3.9 ms
Approx. 100 cm
Approx. 150 cm
Approx. 200 cm 5.3 ms
•Surround speakers
Difference
Setting
Approx. 200 cm
Approx. 400 cm 10.6 ms
EESE!
Select either '
2
-channel" or "Multi channel" to suit the speakers you
have connected. You can change the following settings when you
select 'Multi-channel''.
;tpj Speaker presence and size
1. Press [A.T,-*. ►) to select the Item and press [ENTER].
2. Press [A ,▼] to select the setting and press [ENTER],
Icon examples: Surround speaker (L)
Large: when the speaker supports low-frequency funder 100 Hz)
reproduction.
Small: Select when the speaker does not support low-frequency
reproduction.
The sizo sotting for the front speakers is automatically determined by
the setting for the subwoofer
(Dolby Digital, center and surround speakers only)
For optimum listening with 5. t-channel sound, all the speakers, ex¬
cept for the subwoofer, should be the same distance from the seating
position. It you have to placo the center or surround speakers closer
to the seating position, adjust the delay time to make up for the differ¬
ence.
If distance (2) (from the center speaker) and 0 (from the surround
speakers) are the same as or greater than © (from the front speak¬
ers). leave the delay time as "O', the factory preset.
If either distance © or © is less than find the difference in the
relevant table and change to tho recommended setting.
•Center speaker
Sotting
1.3 ms
1. Press [A, ▼, ◄ , ►] to select "Test" and press [ENTER].
A test signal is output from one speaker at a time, starting with the
Iront left speaker and proceeding clockwise. (0)
2. While listening to the test signal, press [A. ▼] to adjust the
volume of the center and surround speakers so they are the
same apparent volume as the front speakers.
(The front spoakors cannot be adjusted here )
3. Press [ENTER],
(The test signals are stopped.)
No signal is output for the subwoofer. To adjust its volume, play
something, then return to this screen to adjust to suit your taste.
Changing the delay time
1, Press [A.T,^, ►] to select tho delay time box and press
[ENTER].
2. Press [A,T] to adjust the delay time and press [ENTER[.
When you are finished
Press [ A, ▼. ◄ ► ] to select 'Exit' and press [ENTER].
® FRONT (L) —»CENTER
I
SURROUND (L)-
—»FRONT(R)
I
SURROUND(R)
6; Test
signal
Surround
(L)Q <L)H
□
(R)H (R)D
'O O
O
oo o
re; Numbered
buttons
Speaker setting
Channel balance