Panasonic DVD-RV41 Operating Instructions Manual page 28

|^\ yvith'*5.1 - |
DVD-RV41
Connecting an amplifier with a built-
B Ijin decpder^adecader-amplifier
Hn'
® Audio cable
®
White
(L)
«0>»
—
©Red (R)«^~
© Back of the unit
© Back of the unit
© Connect cables to
terminals
corresponding to
the speakers you
have connected.
© Insert fully, with
— this side (acing
up.
© Optical digital audio cable
Do not bend when connecting.
© © © ©
CENTER SUB- SURROUND
WOOFER (R)
© 0
FRONT
(L) (R)
OPTICAL
I O CD PCOT (
_
© Amplifier
© Speakers
You can enjoy surround sound by connecting from
three to six speakers.
Example: Six speakers
•Select "Multi-channel" and adjust the settings to suit the Adjust the settinc
speakers you have connected (** page 24). nected («• page 2I
•Select "No" in "PCM Down Conversion" (-* page 25).
Adjust the settings to suit the equipment you have con¬
nected («»page 25).
CBS
«Turn Advanced Surround off (■* page 14) if you have connected a
center speaker, surround speakers or a subwoofer, as well as the
front speakers. Sound will not come from the other speakers if
Advanced Surround is on.
•Use the connection described in Q at right to enjoy DVDs encod¬
ed with DTS.
•If you do not connect a subwoofer, it is advisable to connect front
speakers (L/R) capable of producing bass of less than 100 Hz.
You cannot use DTS Digital Surround decoders not suited to DVD.
97
\