Sony TRINITRON KV-1442 Service Manual page 5

ON-SCREEN DISPLAY WHILE TUNING
The band in which the channel is being tuned in and a bar
will appear. The length of the bar shows the approximate
position of the channel being tuned in within the band.
Program number
~+---- Band indicator
"V-L" for VHF low frequency
band
"V-H" for VHF high frequency
band
for higher-frequency "UHE" for UHE band
channels
for lower-frequency channels
FINE-TUNING OF A WEAK STATION
If the picture of a particular channel is not acceptable, make
sure PRESET is set to OFF (the band indicator does not
appear on the screen), and keep + or - MANUAL/FINE
pressed until the picture becomes clearer. When either
MANUALJFINE is pressed, the automatic fine tuning on the
selected channel is deactivated and the AFT ON indicator
goes off. To view this particular channel, keep the automatic
fine tuning deactivated. (Do not press AFT.) When other
channels are selected, the automatic fine tuning activates
automatically.
SKIPPING UNUSED PROGRAM POSITIONS
1 Press PRESET (ON) when the program number display
shows an unused position. The program number will blink.
2 Press CLEAR.
3 Press PRESET (OFF).
Later, when you press PROGR +/-, the unused positions will
be skipped.
| KV~-1442ECPS
RM-651