Sony TRINITRON KV-1442 Service Manual page 4

Xe-5 chassis
Table of Contents

Advertisement

KV-1442ECPS
|
RM-651
1-2.
PROGRAMMING
Automatic and manual programming are available.
Automatic programming presets up to 30 receivable
channels automatically from the lowest frequency to the
highest. With manual programming the active channels can
be preset in any desired sequence.
Panel opened
ON
MANGAL
PRESET
Ci€AR
AUTO
FINE
T
COLOR SYSTEM selector
|
PRESET button
AFT button and AFT
ON indicator
CLEAR button
MANUALUFINE tuning
AUTOMATIC PROGRAMMING
1 Depress ©.
2 Press
<on the Commander if the "< indication is
displayed on the screen.
3 Make sure that COLOR SYSTEM is set to AUTO.
4 Press PRESET (ON) to set the TV in the programming
standby mode. The program number will blink and the
band indicator will appear on the screen.
5 With PROGR +/- or the program number buttons on the
Commander, select the program position from which
automatic programming begins.
6 Press AUTO.
Automatic programming will start to tune in all receivable
channels in sequence. When no more station can be
located, the program number from which the automatic
programming started will light on the screen and
automatic programming will stop. The programming mode
will be cancelled automatically.
button
AUTO (Automatic programming) button
1 Depress ©.
2 Press
<onthe Commander if the < indication is
displayed on the screen.
3 Make sure that COLOR SYSTEM is set to AUTO.
4 Press PRESET (ON) to set the TV in the programming
standby mode. The program number will blink and the
band indicator will appear on the screen.
+ for a higher-numbered position, and — for a lower-
numbered position.
6 Press + or - MANUALIFINE.
The first channel found will appear. Every time you press
+ MANUALIJFINE, a higher-numbered channel will be
tuned in and every time you press
- MANUAL/FINE, a
lower-numbered channel will be tuned in. Repeat pressing
until the desired channel is found.
Repeat steps 5 and 6 for all desired channels.
7 Press PRESET (OFF).
To reset the TV to the lowest frequency of the band, press
CLEAR when PRESET is set to ON.

Advertisement

Table of Contents
loading

Table of Contents