Sony DPP-MS300 Operating Instructions Manual page 42

For
Your Information
Precautions
On
safety
• Operate the printer
on
110 to
120
V AC
(for
the
DPP-
MS300)
or 220
to
240
V AC
(for
the
DPP-MS300E),
50/60
Hz
only.
• Be careful
not
to set
or
drop any heavy
objects
on
the
power
cord,
or
to
damage
the
power cord
in
any
way.
Never
operate this
printer
with a
damaged
power
cord.
•
Should any solid object or liquid fall
into
the cabinet,
unplug the printer
and have
it
checked
by
qualified
personnel before operating
it
any
further.
• Never disassemble
the
printer.
•
To disconnect the
power
cord, pull
it
out
by the plug.
Never
pull the
power cord
itself.
•
When
the printer
is
not going
to
be used
for
an
extended period of time,
disconnect the
power
cord'
from
the
wall
outlet.
•
Do
not handle
the printer roughly.
• To
reduce the risk of electrical
shock,
always unplug
the printer
from
the electrical
outlet
before cleaning
and servicing the printer.
On
installation
• Avoid placing the
printer in a location subject
to:
-
vibration
-
high humidity
-
excessive
dust
-
direct
sunlight
-
extremely high
or
low temperatures
•
Do
not use electrical
equipment near the printer.
The
printer will
not
work
properly in
electromagnetic
fields.
• The
printer
is
designed to
operate horizontally.
Never
attempt to
operate the
printer in a
tilted
position.
•
Do
not place
heavy objects
on
the printer.
•
Leave enough
room around
the printer so that the
ventilation
holes are
not
blocked. Blocking these
holes
may
cause internal
heat build-up.
For Your Information