Sony DPP-MS300 Operating Instructions Manual page 16

Loading the
print cartridge
(continued)
If
ink
ribbon should tear
Repair
the ribbon with
,
transparent
tape.
There
should be no problem
with using
the remaining
portion of the ribbon.
Before loading the print
cartridge into the
printer,
turn the
reel until the
transparent tape can no
longer be
seen.
Repair with
transparent
tape.
Notes on
storing the
print cartridge
•
Avoid
placing the
cartridge
in
a location
subject
to:
- high
temperatures
-
high
humidity
-
excessive dust
-
direct sunlight
•
When
you
are
going
to
store a partially-used
cartridge
for
an
extended period
of
time, store
it
in
its
original
bag.
To
eject the
print cartridge
Open
the cartridge compartment
lid
and push up
the
eject lever.
Then remove
the print
cartridge.
Cartridge
error indicator
Push up
the
eject lever,
^
then remove
the used
print cartridge.
To
replace the
print cartridge
If
you
try to print
when
the ink ribbon of
the print
cartridge runs
out, the print paper
is
automatically
loaded and
then
ejected
and
the cartridge
error
indicator
flashes.
Remove
the print paper. Then open
the cartridge
compartment
lid
and
replace the used
print cartridge
with
the
new
one.
The
ejected print
paper can be used
again.
Setting
Up